home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Overload Trio 2
/
Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO
/
dir30
/
mcadam1.zip
/
MCD.ZIP
/
MCADAM
/
MCINSTAL.DAT
< prev
next >
Wrap
Text File
|
1993-11-23
|
5KB
|
162 lines
INSTRUCTIONS FOR EDITING THIS FILE
==========================================================
DATA FILE FOR MCINSTAL.EXE PROGRAM
This file is organized as follows:
DESCRIPTION~DEVICE~EXTRA
DESCRIPTION is the description which will appear on the
screen during the MCINSTAL.EXE program.
DEVICE is the device driver name which will be appENDed to
?:\MCADAM\DRIVERS and be inserted into the user config.sys file.
EXTRA is applicable to printers/plotters and the mouse.
In the case of printers/plotters EXTRA=exact mode command
specification for the printer or plotter. If this information
is left blank then MCINSTAL will ask the user for COM port
information like baud rate, parity, data bits, and stop bits.
In the case of mouse EXTRA=M for mouse or T for tablet,
if it is blank M (mouse) is assumed.
THE TILDEN (~) CHARACTER IS ABSOLUTELY NECESSARY.
==========================================================
If you make changes, make sure the description field does
not exceed 60 characters or the mcinstal.exe program
will overflow during display.
==========================================================
Comments can be entered but they must occur OUTSIDE the
BEGIN/END sequence or they will appear in the device list,
if they occur within the BEGIN/END sequence start them with
the # character.
==========================================================
DISPLAY
BEGIN
IBM EGA (Enhanced Graphics Adapter)~IBMEGA.SYS
IBM VGA (Video Graphics Array)~IBMVGA12.SYS
IBM PS/2 8514/A or XGA Graphics Adapter~IBMAFH.SYS
Calcomp Drawing Board~CALDISPB.SYS
Control Systems Artist 10/16~ART10CGI.SYS
Control Systems Artist 10/16 MC~ARTISTMC.SYS
Control Systems Artist XJ10~ARTXJ10.SYS
Control Systems Artist XJ12~ART12CGI.SYS
Metheus 1104~METHEUS.SYS
NEC Graphics Engine~CGIDGIS.SYS
Super VGA (800X600)~HRVGA.SYS
Tseng 4000 Chip Set~ET4000.SYS
Vermont Microsystems Cobra-1B3~IMVDI2.SYS
Vermont Microsystems Cobra2/Plus~VMCGIS.SYS
Vermont Microsystems Cobra Elite~VMCGISE.SYS
Vermont Microsystems ImageManager 1024/8E~IMVDI2.SYS
Video Seven VEGA VGA~IBMVGA12.SYS
END
#
#
#
PRINTER
BEGIN
Epson FX/MX/RX80 Series~EPSON80.SYS~6,9600,N,8,1
Epson FX/MX/RX100 Series~EPSON100.SYS~6,9600,N,8,1
Epson LQ800/950/1000/2500/2550 Series~EPSONLQ.SYS~6,9600,N,8,1
Epson EX800/1000, FX85/86e/185/286, LX800, MX80F/T~EPSONX.SYS~6,9600,N,8,1
HP LaserJet Plus/Series II~LASERJET.SYS~2,9600,N,8,1
IBM Proprinter II/XL~IBMPRO.SYS~6,9600,N,8,1
Okidata Microline 84 & 93~OKID84.SYS~6,9600,N,8,1
Okidata Microline 92~OKI92.SYS~6,9600,N,8,1
Toshiba P351 & P1350~TOSHIBA.SYS~6,9600,N,8,1
END
#
#
#
PLOTTER
BEGIN
Calcomp PCI Plotters~CCP.SYS~2,9600,N,8,1
Computer Graphics Metafile (CGM) Generator~META.SYS~1,9600,N,8,1
HP - 7440/7470A/7570/7580B/7585B/7586B/7595/7596~PLOTHP.SYS~2,9600,N,8,1
IBM - 737X/6180/6184~PLOTHP.SYS~2,9600,N,8,1
Zeta 8~ZETA8.SYS~2,9600,N,8,1
HPGL HP Graphics Language File Generator~HPGL.SYS~1,9600,N,8,1
HPGL2 HP Graphics Language/2 File Generator~HPGL2.SYS~1,9600,N,8,1
Houston Instruments Plotters~HIDMPL.SYS~2,9600,N,8,1
END
#
#
#
MOUSE
BEGIN
#
#
MSC PC Mouse (MouseSystems)~MSMOUSE.SYS~M
IBM PS/2 Mouse~PS2MOUSE.SYS~M
Microsoft Serial Mouse~MSMOUSE.SYS~M
Microsoft Bus Mouse~MSMOUSE.SYS~M
Summagraphics SummaSketch Plus MM1201 & MM961~SUMMATB.SYS~T
Logitech Serial Mouse~MSMOUSE.SYS~M
Calcomp DrawingBoard Series 2300~CALCOMPB.SYS~T
END
==================================================================
The following section (DRIVERS) should be used for names of special
drivers within MICRO CADAM which do not have the extension .SYS.
MCINSTAL will copy these drivers in the directory \MCADAM\DRIVERS
when it copies all the .SYS drivers, and it will copy this driver
into the C:\MCADAM directory for boot up purposes.
DRIVERS
BEGIN
CGIPREP
END
==========================================================
The following section (DEFAULT) was added in Feb of 1988
to support default options for all selections. The user
can enter information about his system into MCINSTAL and
using the following data, it will be remembered and when
they bring it up later the information will be recalled
from this data file using the following option.
DO NOT EDIT THIS DATA. ONLY MCINSTAL.EXE SHOULD EDIT
THIS INFORMATION. IF YOU CHANGE THE FOLLOWING LINES
MCINSTAL.EXE MAY NOT WORK CORRECTLY.
==========================================================
THIS SECTION MUST BE THE LAST IN THE FILE OR MCINSTAL
WILL NOT RUN PROPERLY.
==========================================================
DEFAULT
BEGIN
\AUTOEXEC.CAD
\CONFIG.CAD
\AUTOEXEC.OLD
\CONFIG.OLD
C:\MCADAM\
\DOS
N
\PC3270
0
ffff
-1
7
C:\MCADAM\DRIVERS\IBMVGA12.SYS
2
C:\MCADAM\DRIVERS\MSMOUSE.SYS
050
000
000
1C
M
5
C:\MCADAM\DRIVERS\HPGL.SYS
7475
METAFILE.DAT
1 9600 N 8 1
-1
D:\MCADAM\DRIVERS\LASERJET.SYS
6 9600 N 8 1
IN
1
11X17
N
N
1
C:
C:\MCADAM\DRIVERS\
END